开平力士乐HVE02.2-W018N伺服驱动器F262故障维修解析过程

                           开平力士乐HVE02.2-W018N伺服驱动器F262故障维修解析过程

            开平力士乐伺服驱动器维修报价查询：

F262故障含义：External Short at Status Outputs状态输出处的外部短路

Description:故障说明：

Status outputs are monitored for short circuits and thermaloverload.

监控状态输出是否存在短路和热过载。

• If output current exceeds 350mA for about 1μs, then thisis acknowledged as a short circuit and the pertinent channel isshut off.如果输出电流超过350mA持续约1μs，则这被认为是短路，相关通道被关闭。

The output remains off unti the error is cleared.

输出保持关闭，直到错误被清除。

• With thermal overload, the error is set and the output(s)shut off. After the driver has cooled off, the outputs are switchedback on and so on.

热过载时，设置错误并关闭输出驱动器已冷却，输出重新打开等。

The error, however, remains until it is cleared. Thermaloverload can occur if several outputs are overloaded in excess of80 mA.错误将一直存在，直到清除为止。如果多个输出过载超过80 mA，可能会发生热过载。

Note: Light bulbs, for example, cannot be controlled as theirinrush current causes a short-circuit.注：例如，灯泡无法控制其浪涌电流会引起短路。

Cause:原因：

1. Short circuited outputs (X2/6, X2/7, X2/8, X2/9, X2/10,X2/20, X2/21, X2/22)

短路输出（X2/6、X2/7、X2/8、X2/9、X2/10、X2/20、X2/21、X2/22）