佛山市金属材料制品屈服强度弯曲扭力正规检测机构
试验方法 | 试验项目 | 试验标准 |
室温 | Standard TestMethods for Tension Testing of Metallic Materials 金属材料拉伸试验方法 | ASTM E8/E8M-13a |
Standard TestMethods and Definitions for Mechanical Testing of SteelProducts 钢制品力学性能试验的标准试验方法和定义 | ASTM A370-14 | |
Metallic materials-- Tensile testing -- Part 1: Method of test at roomtemperature 金属材料--拉伸试验--第1部分:常温测试法 | ENISO6892-1:2009 | |
金属材料室内拉伸试验方法 | GB/T228-2002 | |
金属材料 拉伸试验室温下试验方法 | JIS Z 2241-2011 | |
Metallic materials -Tensile testing at ambient temperature 金属材料 -拉伸试验在环境温度下 | AS 1391-2007 | |
Standard TestMethods for Tension Testing Wrought and Cast Aluminum- andMagnesium-Alloy Products 锻造和铸造的铝及镁合金制品抗拉试验的标准试验方法 | ASTM B557-14 | |
高温 | Standard TestMethods for Elevated Temperature Tension Tests of MetallicMaterials 金属材料高温拉伸试验方法 | ASTM E21-09 |
Metallic materials-- Tensile testing - Part 2: Method of test at elevatedtemperature 金属材料--拉伸试验--第2部分:高温下的试验方法 | ISO 6892-2 :2011 | |
Metallicmaterials--Tensile testing at elevated temperature 金属材料 高温拉伸试验方法 | GB/T 4338-2006 | |
钢铁材料及耐热合金的高温拉力试验方法 | JIS G 0567-1998 金属材料 高温拉伸试验方法 | AS 2291-2007 |
低温 拉伸试验 | 金属材料 低温拉伸试验方法 | GB/T 13239-2006 |
金属材料 低温试验方法 | ISO 15579:2000 |
常温和高温拉伸:
1.线材、圆棒试样:
d≥10mm,长度 L≥200mm
3mm≤d≤10mm,长度 L≥200mm
d≤3mm,长度 L≥1000mm
(线材Zui小300mm,棒材Zui小80mm)
2.矩形试样:
≥16*200mm(LZui小120mm)
3.管状试样:
OD≤30mm, L≥300mm (Zui小150)
OD>30mm, 一般要求L≥300mm
另 OD≤55mm,可整管拉伸